WIL-RICH Rippers

957 DDR Ripper

The 957 DDR Ripper is engineered to work in heavy residue conditions. The "smooth action" auto reset shanks have 4500 pounds point pressure with 16 inches of trip clearance. The 957 provides enough strength to break hardpan, allowing soil to absorb moisture to allow better root penetration for increased crop yields.

Use a 957 DDR to decrease soil erosion, increase the root zone for better root penetration, and fracture soil for better moisture intake.

Standard Features:

• Hydraulic control disk gangs - 15" spacing with 7 1/2" cut
• Smooth or notched blades (28 x 5/16)
• 24" or 30" shank spacing
• 50-60 PTO HP per shank
• 5, 7, or 9 shanks
• 4500 pound shank trip pressure
• Single wheel axle or walking beam axle
• 1 1/4" abrasion resistant steel shank with chromium carbide shin guards

357 Inline Ripper

With the 357, you determine furrow size and surface residue by combining different shanks and points and adjusting your operating speed. Ask your Wil-Rich dealer to help you pick the best setup for your soil type and farming practices.

Standard Features:

• Frame: 4" x 6 x 3/8" 2-bar
• Hitch: 3-Point or Pull-Type
• Rigid, flat fold, over center fold
• 35" under frame clearance
• Rigid or spring reset holders
• 3000 pound point pressure - spring reset
• Operating speeds: 4½ to 6 mph
• Shanks working depth: 16" maximum
• Parabolic or minimal disturbance shank
• Parabolic shanks: 1-1/4 x 3 High Strength Abrasion Resistant Steel
• Minimal Disturbance Shank: 1-1/4 x 4 shank
• Shank staggering brackets (optional)
• Gauge wheels: 20.5 x 10; 10 ply (optional)
• Coulters working depth: 7" maximum (optional)
• Coulters: 20" rippled
• 35 to 50 horsepower (PTO) per shank (suggested)
• Safety Equipment: Transport Warning Lights
• Parking stand (two required on 3pt models)

[Go Back]